Where is colour code on bmw

The most likely spots are:. The VIN number is a 17 digit code found in a variety of locations on your car and in the official paperwork for your car.

Once you have the VIN number, contact your local BMW dealer and they will be able to look up your car and tell you what the paint code is. Getting the right paint code number is the first step to getting a perfect BMW touch up paint. All color paints require being finished with a protective layer of clear coat. For the vast majority of BMW cars this is a high gloss clear coat, there are a couple of notable exceptions.

Make sure you choose the right kind of clear coat for your BMW. The paint code is for Imola red 2 on this image. A colour name will also often be stated on the Bmw brand Usually in it's German version of the colour name. If you would like to include this name with your order we can double check the code ordered. If your code is not in these two loctaions it may be found toward the front of the engine bay, behind the headlamp.

The Bmw mini paint code can be found near to the front wing but is only revealed when the bonnet is raised. We recommend always confirming the colour code on the vehicle prior to ordering. Then use rust converter and apply it to the rusted area of your BMW.

Apply several thin coats of primer to the BMW paint you are going to repair. Only apply a small amount of primer to your BMW at time. Let the primer dry, overnight if possible, before applying the BMW touch up paint. Once dry, lightly sand the primed BMW paint area with grit sandpaper followed by wet and dry sandpaper.

You are now ready to apply BMW touch up paint to your car. Apply several thin coats of BMW touch up paint to build up the damaged paint area to the same depth as the surrounding surface.

Let the BMW paint dry for ten to twenty minutes between coats. After the final coat, let the paint dry thoroughly before applying a clearcoat layer. Usually if you let the BMW paint dry overnight, it will be dry.

If temperatures are below 70 degrees F, allow additional time for the BMW touch up paint to dry. Make sure the BMW touch up paint you applied earlier is dry. Apply several thin coats of clearcoat over the touched up BMW paint, drying for ten to twenty minutes between each coat. Let the clearcoat dry overnight, or longer if temperatures are less than 70 degrees F. Rubbing compound will help your BMW touch up paint repair become smooth and shiny like the original paint.

Let the clearcoat dry for at least three days, then use rubbing compound on your BMW. Apply rubbing compound to your BMW paint with a clean, soft cloth like an old tee shirt, but not wood products like paper towels. Place a small quantity of rubbing compound on the area where you applied BMW touch up paint. Use circular strokes while applying even pressure to the surface. Buff with a clean cloth to a high gloss.

For best BMW touch up paint results, let your BMW's finish dry for thirty days and then apply a good quality automotive wax. Once you are ready to repair your BMW with touch up paint, you need to decide which BMW paint repair products to order.

Toggle navigation. Find your BMW paint color by clicking your vehicle's model:. Need paint for another vehicle?